NAME OF PRODUCT:  RECON TECHS ULTRA GLOSS™
 
ITEM NUMBER OF PRODUCT:  CPG6002
 
DESCRIPTION: RECON TECHS ULTRA GLOSS™ Final Step Polish has surpassed many polishing creams by leaving your paint with a true shine that will not wash off even after an IPA wipe. This is important for coating installers to have a polish that leaves behind a true polished surface. No fillers and easy removal make this polish a breeze to use before coatings, after coating the vehicle, or just polishing your vehicle’s paint. 
 
DIRECTIONS:
1)    Use a polishing foam pad and Very low to Low speed
2)    NEW PAD (PRIME IT) once pad is seasoned apply 2 to 4 drops to your liking. 
3)    Polish a section 3x3 at most and complete 4-8 passes to ensure the polish can diminish down to a coating ready surface.
4)    Remove excess with a soft microfiber towel. 

PRODUCT HIGHLIGHTS:
•    No Dusting
•    No Fillers
•    Superb Final Polish Cream
•    Body Shop Safe
 
DISCLAIMER:  KEEP OUT OF REACH OF CHILDREN. ALWAYS WEAR PROTECTIVE EQUIPMENT. See Safety Data Sheet for further details regarding safe use of this Product.
 
SAFETY INFO:  WARNING! Combustible liquid. May be harmful if swallowed, May be harmful if in contact with skin. May cause serious eye irritation. May be harmful if inhaled.  If medical advice is needed, have product container or label on hand. Keep out of reach of children. Read label before use.
 
PREVENTION: Keep away from heat/sparks/open flames/hot surfaces. No Smoking while using this product. Wear protective gloves/eye protection or face protection. Wash thoroughly after handling.
 
IF SWALLOWED: Call a POISON CONTROL CENTER or doctor/physician if you don’t feel well.
 
IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CONTROL CENTER or doctor/physician if you don’t feel well.
 
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical advice/attention.
 
IN CASE OF FIRE: Use dry chemical, foam, or carbon dioxide to extinguish fire. Water may be ineffective but should be used to cool fire-exposed containers, structures and to protect personnel. Use water to dilute spills and to flush them away from sources of ignition. 
 
Health - 1
Fire - 2
Reactivity - 0
Special - 0